Silver Star ES-300 Steam Iron – 110 Volt Gravity Fed Hanging Bottle Clothes Iron with Non-Stick Laminate Sole Plate, Demineralizer Cartridge, Silicon Iron Rest & Hardware

Product Description

THE FIRST TIME YOU USE A GRAVITY-FEED IRON YOU’LL NEVER WANT TO BE WITHOUT ONE AGAIN!

Silver Star irons use gravity to offer the water circulate and stress that permits the iron to supply its personal very dry, voluminous steam. Silver Star gravity feed irons simply open seams, flatten darts, set pleats immediately, give sharper creases and extra! Tremendous simple to make use of! Silver Star gravity-feed irons are extraordinarily vitality environment friendly and easy to take care of. Additionally, the built-in sheathed wire heater improves thermal effectivity, shortens heating time, and presents financial effectivity. Simply replenish the included 1-gallon plastic tank, grasp it above your work floor, set up the included demineralizer cartridge into the water line to get rid of the necessity for distilled water, and also you’re all set! A Silver Star iron is a rugged product, constructed to face up to years of use. Its snug and glossy design means that you can get to these hard-to-reach areas. This package additionally consists of an in-line demineralizer cartridges and an ironing shoe that’s gentle and ideal for ironing taffeta, gabardine, nylon and any artificial materials with no shine or scorch.

IMPORTANT INFORMATION FOR FIRST TIME USERS…

In contrast to peculiar family steam irons, Industrial Gravity Feed Steam Irons (IGFSI) generate a complete lot of steam in a short time. When working your iron, it is essential that you do not maintain the steam button down for an prolonged size; just some seconds is all you want for a full burst of thick steam. Holding the button too lengthy could cause the iron to construct up approach an excessive amount of steam, which can lead to sputtering, spitting, and sometimes profuse leaking from underneath the only real plate. If you happen to discover the iron begin to sputter, spit, or leak, cease ironing, dry the iron completely, then resume, however this time use the steam button extra sparingly.

Options :

U/L accepted thermostat for safetyDurable urethane deal with is snug and retains fingers coolEasily-replaceable thermostatStainless metal and anodized aluminum base for superior urgent and floor durabilityStylish, fashionable physique designConvenient soft-touch microswitch button constructed into handlePowerful steam era and environment friendly distributionHard anodized aluminum sole plate with non-stick laminate coatingHeat defend for added protectionRotary warmth dial for simple operation

Bundle Contains:

Silver Star ES-300 industrial steam ironLaminate non-stick sole plate1 gallon plastic hanging water bottleInline demineralizer cartridgeSilicon-coated metallic iron restHoses and all required hardwareDetailed directions and components handbook

Warmth & Steam

The power to supply a whole lot of steam is what makes an iron nice. Silver Star gravity-feed steam irons produce a whole lot of steam! Silver Star irons are nice for fusing interfacing, and also you by no means have to use a lot stress with an iron that weighs 4 kilos!

Industrial Energy

Silver Star irons are designed and constructed for industrial purposes, they’re sturdy and difficult. They’re additionally very simple to setup and function, which makes them superb for home use too.

Simple Three-Step Setup!

STEP 1 : Set up Sole Plate

The non-stick laminate sole plate, additionally known as an iron shoe, is a useful companion to your Silver Star gravity-fed steam iron. It prevents overheating, burns, scorching, and shine, it additionally helps evenly disburse the steam that’s emitted by your Silver Star iron.

To put in, merely lay the only real plate on a flat floor with the white laminate aspect down, carry the hooked up spring and slide the iron beneath the spring. (Fig 1) Push the iron ahead till it absolutely seats into the only real plate, (Fig 2) then place the spring as wanted to use correct stress and help. (Fig 3)

STEP 2 : Join Water Bottle

It is essential to all the time use demineralizer to take away heavy metals and different contaminates from the water earlier than it enters your iron. The Silver Star inline demineralizer cartridge makes this simple! Merely join one finish of the quick black rubber hose to the outlet in your water bottle, join the opposite finish to the inlet of your demineralizer cartridge, and join the outlet of the cartridge to your blue water provide hose. (Fig 1)

After the demineralizer cartridge is in place, slip the 4” metal spring over the open finish of your blue water provide hose after which gently slide the hose and spring onto the solenoid valve inlet, which is situated on the aspect of your iron. (Fig 2) Be sure that the water provide hose and metal spring are securely seated towards the solenoid valve. (Fig 2) Lastly, set up the small white hooks, as wanted, to the hose and energy wire in order that they’re simpler to handle (fig 3).

STEP 3: Fill & Hold Water Bottle

Your bottle has a minimal water stage that’s clearly marked with a blue line. Fill the bottle with as a lot clear faucet water as you want, ensuring it exceeds the minimal.

The bottle could also be hung from a hook completely affixed to the ceiling or a wall, or it’s possible you’ll discover it helpful to get your self an IV pole to hold it from, which makes it transportable. (IV poles can be found on Amazon, in fact!) The essential factor when hanging the bottle is to ensure the underside of the bottle is not less than 3 toes (36 inches) above your ironing floor. (Fig 2) It might probably grasp greater if you happen to desire, but it surely ought to by no means grasp decrease than 36 inches. Final, open the water valve on the underside of your hanging water bottle and also you’re prepared to start ironing.

Only a Contact

A contact of the button is all you want to generate a complete lot of steam in a short time. By no means maintain the button down for various seconds, as a result of this could trigger the iron to spit and sputter, and to leak water onto your venture.

Mannequin Identify ES-300 Voltage 120V ~ 50/60 Htz Wattage 1000W Iron Weight 4.7 lbs Base Measurement 8″ x 4.625″ Bundle Weight 7.9 lbs Nation of Origin South Korea Included Equipment Demineralizer Cartridge & Non-Stick Sole Plate

Industrial Gravity Feed Steam Iron (IGFSI) is a self-contained ironing system that doesn’t require a boiler. It makes use of a seperate water bottle that should be suspended above your working floor.
Constructed-in sheathed wire heater presents superior thermal effectivity and shortens heating time, which make this iron very economical.
All Silver Star irons are rugged and constructed to face as much as years of use.
When working your iron, it is essential that you do not maintain the steam button down for an prolonged size; just some seconds is all you want for a full burst of thick steam.
Equipment consists of 110-volt steam iron, 1 gallon hanging water bottle, demineralizer cartridge, non-stick sole plate, silicone iron relaxation and all required {hardware}.