Large Area Heated Driveway System for Concrete/Asphalt/Pavers – 240V – 37 Watts per Square Foot –Moisture & Temperature Automatic Activator (370 Square Feet)

Product Description

Add to Cart

Value

— no knowledge

— no knowledge
$4,059.00$4,059.00

APPLICATION
Snow melting for areas smaller than 50 sq. ft Snow melting for areas between 10 and 185 sq. ft Snow melting for areas between 410 to 1040 sq. ft

ACTIVATOR
12-Hour TImer Computerized – Distant Moisture sensor & twin circuit relay Computerized – Distant moisture sensor and temperature sensor

CIRCUITS
SINGLE 240V 20 AMP SINGLE 240V 30 or 40 AMP 2-4 240v 40 or 50 AMP

Snow Melting with Ease

Activator Included

The M326 line of activators comes with all normal, giant, jumbo and high-wattage SnowMeltz kits. By no means fear about forgetting to energy in your snow melting system earlier than a snow storm.

Energy Switching

The M326 sequence even have the ability switching gadget and handles as much as a real 30 amps of load. Eliminating the necessity for a panel for programs underneath 190 sq. ft.

For programs between 200-380 sq. ft, we use a M326ARS-2Z, which has twin 30-amp energy switching properties.

Computerized is Superior

Make sure you get the response you want for you heated driveway or heated sidewalk system with an automated moisture and temperature sensor. The activator will energy on the snow melting system when snow is detected and the temperature is beneath 37 levels after which run for 90 minutes after one or each of these situations aren’t met.

M326 Collection Activators Moisture Detection Temperature Detection 30 Amp Energy Change (M326A) Twin 30 Amp Energy Switches (M326ARS-2Z) Handbook Change Afterrun Settings Climate-proof Case Adjustable Temp & Moisture settings

SnowMeltz Jumper package Placement

SnowMeltz Jumper Equipment

The SnowMeltz Jumper package comes normal with each SnowMeltz Snow Melting system. Every package incorporates sufficient supplies to make 4 jumpers.

We have concrete dealt with!

SnowMeltz Jumper Equipment

Putting in a SnowMeltz snow melting package in new driveway or sidewalk concrete and need to take care of management joints, we have got an answer! First step is to structure your SnowMeltz mat so to reduce the variety of instances it crosses a joint. When it does cross a joint, through the use of the offered jumper kits to encase and defend the SnowMeltz heating ingredient, cracks that happen at that management joint significantly reduces the potential of harm to the heating ingredient, including years of snow melting to the system.

To be used in new concrete pours, not wanted in sand beds or asphalt. For management joints solely, not to be used with growth joints.

Simply Warmth your Concrete, Asphalt, Paver Driveway or Sidewalk with SnowMeltz Snow Melting Mats

Pavers

Embedding SnowMeltz in sand beneath pavers retains aesthetic surfaces free from Ice and Snow with a heated sidewalk.

Concrete

Maintain essential entry concrete driveways, like walkways and ramps clear with a snow melting mat system.

Asphalt

Embed SnowMeltz in asphalt to create snow & ice free heated driveways and paths.

Observe all directions & native codes

Full Testing

Carry out all required exams outlined within the set up handbook at a number of levels all through set up to make sure that heating ingredient has not been broken.

Failure to carry out all of the required exams at a number of levels could cause system harm to be missed which might result in system errors, floor faults, non-functional programs, and unrepairable harm.

Fully Embed

The SnowMeltz heating cable MUST be fully embedded in concrete, asphalt or within the sand mattress beneath pavers.

Each connection/junction factors should even be totally embedded, the connection level on the finish of the heating ingredient and the connection level between the heating cable and the black unheated (chilly lead) cable.

Don’t embed in gravel or stones.

Do Not Energy On

Don’t energy on the SnowMeltz System till it has been fully embedded.

Don’t energy on a SnowMeltz System to “check” or to dry out concrete.

DO NOT CUT HEATING ELEMENT

Make sure you order a SnowMeltz the suits the realm, normally order one that’s about 10% smaller than space. The SnowMeltz heating ingredient CANNOT be lower or shortened to a match an area.

Smaller measurement programs can be found to suit smaller areas.

Keep away from performing any chopping/drilling duties on a completed/partially completed floor that might trigger harm to heating ingredient.

SnowMeltz Kits

Commonplace Dimension SnowMeltz Kits

Commonplace measurement SnowMeltz kits use a single 30 or 40 amp 240 volt circuit. Sizes from 10 to 185 sq. ft. These kits are available single or a number of mat configurations and are share a single activation gadget. The activation gadget comes with moisture and temperature sensors to function at most effectivity.

Massive Dimension SnowMeltz Kits

Utilizing two 30 or 40 amp 240 volt circuits and a number of mats, the Massive kits are available sizes from 200 to 370 sq. ft. The activation gadget comes with a distant moisture sensor for optimum placement and is used at the side of a temperature sensor to function at most effectivity.

Jumbo Dimension SnowMeltz Kits

Utilizing two to 4 40/50 amp 240 volt circuits a number of mats, the jumbo kits are available sizes from 410, 615, 820 or 1040 sq. ft. The package features a contactor panel appropriate for the scale of system. The activation gadget comes with a distant moisture sensor for optimum placement and is used at the side of a temperature sensor to function at most effectivity.

Fundamental SnowMeltz Kits

Fundamental SnowMeltz kits use a single 20 or 30 amp 240 volt circuit. These kits are designed for areas smaller than 50 sq. ft. Simply add a small snow melting mat to sidewalks, landings or paths. All Fundamental snow melting kits include a 12-hour timer for activation.

Not Simply SnowMeltz Consultants, however Electrical Radiant Heating Consultants

SnowMeltz is simply ONE of Heatizon’s wide selection of fantastic electrical radiant heating merchandise. We apply our huge data into each product we make. Not solely do we offer snow melting, however we will warmth your flooring, gutters, pipes and even your roof.

A number of snow melting for 370 sq. ft utilizing 2x 40 amp circuits (All mats are 2′ large) Excessive-Effectivity Snow Melting: Our heated driveway package offers 37 watts per sq. foot of heating energy at 240 volts with activator. Successfully melting snow and ice to maintain your driveway clear and secure.
Complete Protection: This driveway heater for snow, consists of 4 mats, masking a complete of 370 sq. ft, good for residential driveways and lightweight industrial purposes.
Sensible Activation: Consists of an activator with a temperature and distant moisture sensor that routinely switches two circuits, each dealing with as much as 30 amps every, guaranteeing environment friendly and well timed operation for driveway heating.
Versatile Set up: The straightforward roll-out mats will be configured to suit numerous shapes and will be embedded in concrete, asphalt, or in a sand mattress beneath pavers, providing versatile set up choices.
Licensed Security: ETL Listed to be used within the US and Canada, guaranteeing the best security requirements for heated snow mat. The system is appropriate with handbook and automated activators, and optionally available relay panels with GFEP safety for added security.