2″ and 3″ angle orbital sander, 3-inches random orbital air sander, pneumatic sander for auto sanding tools, dual-action polisher, angle head for tight work areas


$28.57

2″ and 3″ angle orbital sander, 3-inches random orbital air sander, pneumatic sander for auto sanding tools, dual-action polisher, angle head for tight work areas

Product Description

angle orbital sander, 3-inches random orbital air sander, pneumatic sander for auto sanding toolsangle orbital sander, 3-inches random orbital air sander, pneumatic sander for auto sanding tools

2-inches and 3-inches angle orbital air sander function:

This prime quality 2″ air sander with one additional 3″ hook & loop sanding pad is knowledgeable air software for sanding, sprucing, and waxing. Low vibration charge and low power consumption.It applies to auto bodywork and furnishings and extra. Particularly preferrred for spot sanding focus areas.Small dimension, light-weight, excessive stability,Excessive pace, swirl-free tremendous easy and straightforward to one-hand operation. With the adjustable valve of the air inlet, you possibly can change airflow to manage the sanding sprucing waxing pace. Rear exhaust can maintain sander settle down shortly and make it work in a very long time. this software is right for smoothing and mixing physique filler and feather edging earlier than you start portray. Eccentric double-rotation sprucing methodology to make the sprucing impact extra uniform and easy.Appropriate for iron, wooden, plastic, metallic, rubber, stone, marble and different supplies grinding, effective sprucing.A built-in regulator in sander means that you can modify the pace with which you’re employed to fulfill your totally different sanding, sprucing and waxing necessities, for fast and correct outcomes.Several types of sandpaper might be put in with totally different sort of discs.

2-inches and 3-inches angle orbital air sander technical specs:

Pad dimension: 2″ (50mm) and three” (73mm) hook and loop sanding pad.Sharpening methodology:Eccentric double-rotation.Orbit Diameter: 2.8mm.Spindle thread: M6*1 inch.Free Pace: 15,000RPM.Air Consumption: 4 CFM (113 L/min).Air Inlet: 1/4″ American customary.Air Strain: 90 PSI.Exhaust: Rear Finish.Weight: 1.32 lbs (0.60kg).

What’s within the Field:

PROSHI model angle orbital air sander 1 pcs.2-inches (50mm) hook and loop pad 1 pcs put in.3-inches (73mm) hook and loop pad 1 pcs backup.PIN 1 pcs use for changing hook and loop pad.Instruction Handbook 1 pcs.American customary 1/4 NPT fast connector 1 pcs.

2″ and three” angle orbital air sander detailed

3 inches angle orbital sander3 inches angle orbital sander

Kindly reminder:

Earlier than you utilize the air sander, please add 2-3 drops of oil from air fast connector and please enable the software to run for just a few seconds after filling to ensure it really works nicely. (oiler not included in our field)

This software is meant to be operated as a handheld software and is air-powered. It requires an air compressor that can present a clear lubricated air, the place the air hose is related to the software when the software is working.

Completely different angle views for two” and three” angle orbital air sander

3" angle orbital sander3" angle orbital sander

Protected stress plate sort start-stop swap for safer customers and better reliability

3-inches random orbital air sander3-inches random orbital air sander

Stepless pace management knob swap, based on totally different functions, select the totally different pace to fulfill totally different wants

pneumatic sander pneumatic sander

The two-inches or 3 inches hook and loop sanding pad simple changed, that’s light-weight and appropriate for small areas of grinding and sprucing

auto sanding toolsauto sanding tools

Earlier than use, add 2-3cc #60 pneumatic oil to the air inlet to make the fan blade higher lubricated. the cylinder cooling then maintains the torque and delays the lifetime of the machine

How one can exchange hook and loop sanding pad for angle orbital air sander

3-inches random orbital air sander3-inches random orbital air sander

Change sanding pad the first step

Discover the small gap on the highest of the angle orbital sander. When you do not discover the opening close to the surface, use the PIN to carry the rotating block inside. Rotate it just a little to search out it, then insert it into the opening with the PIN.

auto sanding toolsauto sanding tools

Change sanding pad step two

Maintain the PIN, don’t let the PIN slide, rotate the sanding pad within the route of the arrow till the disk is faraway from the angle observe mill

pneumatic sanderpneumatic sander

Inside eccentric view for angle orbital air sander

You will discover how is the construction for Inside eccentric view of angle observe sander

dual-action polisherdual-action polisher

Change sanding pad step three

Proceed to resist the PIN, don’t let the PIN slide, based on the route of the arrow within the image, putting in the brand new sanding pad to angle orbital sander

2-inches random orbital air sander2-inches random orbital air sander

Instruction guide for angle orbital air sander

Please verify off all tightening components of the instruments to be in good situation earlier than operation.Working stress to be 6.3 kg/cm3 (90PSI) at operation.Please seek advice from Determine 1 for the software set up. To put in a filter and a lubricator/oiler at an air outletThe greatest hand stress on the software is from 5Kg to 7Kg when operation.Launch the air provide when changing the sandpaper or the backing pad.Put on safety glasses, eye protector, mud masks and gloves at operation.Have a brief break in each 30minutes to keep away from any potential damage resulting from tiredness.Shouldn’t have free rotating at excessive pace to keep away from potential damage to the human physique and potential software harm.Don’t contact the rotating a part of the software together with your hand or your physique at operation.Begin your sanding job after you match the sanding pad flat on the floor you’re engaged on. Please seek advice from Determine 2.

angle orbital air sanderangle orbital air sander

Routine upkeep for angle orbital air sander

Cease your Job when discovering any irregular sound or vibration at operation after which verify and restore the software.Since you are utilizing clear compressed air at operation. Use an air filter on the air set up to scrub the mud out of the compressed air.Drop some Oil to the inlet of the software after which run the software slowly for a minute and eventually begin your work…Auto Lubricator/oiler is beneficial.Any filth mud contained in the motor might lead to gradual rotation even block working, presently, attempt to drop some oil from the inlet, see whether or not remedy the issue or return to the vendor for upkeep.Do launch the water out of the air compressor and air hose after an operation.Keep instruments with care. Hold instruments clear for higher and protected efficiency, observe directions for lubricating. Examine instruments cords and air hoses periodically, if broken, have them repaired by a licensed technician.

Skilled mini orbital sander with 2″ and three” hook and loop sanding pad (Velcro Backing pad)
Appropriate for iron, wooden, plastic, metallic, rubber, stone, marble and different supplies grinding, effective sprucing.
A built-in regulator in sander means that you can modify the pace with which you’re employed to fulfill your totally different sanding, sprucing and waxing necessities, for fast and correct outcomes.
Completely different sort of sandpaper might be put in with a distinct sort of disc.
Easy down onerous surfaces or sharp edges with skilled air random orbital sander.

Clients say

Clients discover the sander works nicely and is simple to make use of. They take into account it good worth for cash. The pace management receives combined suggestions, with a number of clients noting it is not possible to manage.

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “2″ and 3″ angle orbital sander, 3-inches random orbital air sander, pneumatic sander for auto sanding tools, dual-action polisher, angle head for tight work areas”

There are no reviews yet.