133-WHITE-HEX-KIT Hex Tile – Tub and Shower Wall Panels Surround (Covers/ 96 sq. ft.), Gloss White, 1 Piece

Product Description

Putting in Tub and Bathe Wall Panels Encompass

Eradicating Plumbing Fixtures

To start the method, our first step is to take away the plumbing fixtures connected to the spout. It’s essential to make the most of a strap wrench to keep away from any harm to the end. The bathe valve will be indifferent by loosening the set screw positioned beneath the deal with. As soon as that’s finished, proceed to take away the screws securing the adjusting ring, permitting it to be pulled free.

Set up Necessities: Instruments & Supplies

Razor knife, Scissors, Tape measure, J-roller, Gap noticed, Trowel, Degree, Tub and Bathe Partitions, Silicone Sealant, Cleaning soap, Water, & Damp Fabric for Panel Clear-Up, Mineral Spirits to Take away Extra Adhesive or silicone Sealant, Painter’s tape.

Trimming and Acclimating Panels

To make sure panels are trimmed to the proper measurement, first, deliver the package’s three panels (again, finish, and trim) into the set up room 24 hours upfront for temperature and humidity acclimation. Then, measure and mark the correct dimensions earlier than slicing alongside a parallel line to the alternative edge. You should use scissors, a pointy utility knife, or snips for simpler slicing with added leverage.

Measuring the Facet Wall for Fixture Placement

Precisely measure and observe becoming places on the wall, together with distance from again wall and tub edge to fixture facilities. Switch these measurements to the facet panel, marking fixture positions. Bear in mind the facet panels’ folding flap for a watertight joint at corners and again wall. Make the most of the molded crease on the panel to switch measurements from again nook to fixture facilities, making certain exact marking for faucet, bathe valve, and bathe arm from the crease.

Panel Drilling and Match Verification

Place panel on protecting floor, drill holes, and use a gap noticed for fixtures. Bend panel alongside crease, extending flap for waterproofing in nook and again wall. Take a look at match with folded nook and fixture holes for correct alignment. Tape the left panel briefly and work on the alternative finish part and again wall. Fold the appropriate panel with out drilling and take a look at the match with masking tape. Align edges in opposition to the again wall, draw a information line, and apply adhesive for a clear set up.

Connect Panels with FRP Adhesive

Take away the masking tape and take down the panels for simpler clean-up. Apply masking tape strips alongside the pencil define and high edges of the bath. After making certain an ideal take a look at match, proceed with the set up of bathe wall panels utilizing FRP Fiberglass Strengthened Plastic panel adhesive. Previous to utility, use a clear, dry material and putty knife to wipe down the floor and take away any mud or particles.

Panel Equipment Meeting & Trim Slicing

Securely press panel into adhesive, utilizing hand. Use j-roller to eradicate air bubbles, alternating from heart to edges. Repeat course of with heavy rag, ranging from heart and shifting outward. Set up left panel, then proper panel utilizing FRP adhesive and prompt seize materials, urgent out air bubbles. Connect J-trim over panel edge for a refined look. Lower trim to measurement utilizing utility knife or scissors. Apply clear silicone adhesive inside channel, safe trim, and press in opposition to wall for a watertight seal. Guarantee trim is utilized earlier than panel adhesive units.

Panel Cleansing and Fixture Alternative

Safe again panel with adhesive, eradicating air bubbles. Apply silicone bead on overlapping flap for watertight seal. Tape edges till adhesive units, then apply white silicone sealant and gear bead for knowledgeable end. Reinstall plumbing fixtures, making use of silicone bead for sealing. This DIY-friendly bathe encompass provides tile-like aesthetics at an reasonably priced price, with out the necessity for grout or intensive upkeep.

Put in View of Tub and Bathe Wall Panels Encompass

Appropriate for bathe enclosures, laundry rooms and different moist areas (residential & industrial)
Two adjustable facet panels with folding corners (suits most 30″ to 40″ tubs)
One large again panel (as much as 60″) for customizable match
Ending trim for facet panels included
Straightforward to chop trim items with scissors for exact set up