1/4-Inch Air Die Grinder With Rubber Sleeve – 90 Degree Angle Mini Pneumatic Edge Series

Product Description

1/4-inches air angle die grinder with rubber sleeve characteristic:

The 90-degree head permits flexibility in lots of purposes, for reaching tight or angled grinding.Variable-speed throttle ramps as much as most RPM, Constructed-in air regulator for exact pace management.Light-weight aluminum physique, Rear exhaust, Sturdy ball-bearing motor.The sealed ball-bearing design retains out contaminants selling clean operation.Appropriate for precision machining, smoothing, chamfering, deburring, grinding, sprucing, engraving.Stepless pace management knob swap: In response to totally different functions, select totally different speeds to fulfill totally different needsAir inlet and exhaust port: air inlet filter design, successfully filter air impurities, humanized annular exhaust design.Industrial grade 1/4″ chuck: excessive concentricity, small yaw, low vibration, excessive put on resistance, no warmth, steady operation.Plate-type start-stop swap: secure strain plate kind start-stop swap, extra dependable and extra dependable.1/4″ (6.35mm) high-precision collet: high-temperature carburizing, adapt to higher affect energy, precision CNC lathe processing, not straightforward to deform, bolt. specs: M6

1/4-inches air angle die grinder with rubber sleeve technical specs:

Collet dimension 1/4″ (6.35mm).No-load pace: 20000 RPM.Air consumption: 2.8 CFM, 80L/min.Stress: 90 Psi.Energy: 0.6HP.Air inlet specification: Air Inlet: 1/4″ (American commonplace connector).Product web weight: 0.49Kg.

What’s within the Field:

PROSHI model 1/4-inches air angle die grinder with rubber sleeve 1 pcs.Wrench 2 pcs.backup 1/8″ (1.38mm) collet 1 pcs.Instruction Handbook 1 pcs.American commonplace 1/4 NPT fast connector 1 pcs.

1/4-inches air angle die grinder with rubber sleeve technical specs and dimensions

Kindly reminder:

Earlier than you employ the air angle die grinder, please add 2-3 drops of oil from air fast connector and please permit the device to run for just a few seconds after filling to verify it really works nicely. (oiler not included in our field)

This device is meant to be operated as a handheld device and is air-powered. It requires an air compressor that can present a clear lubricated air, the place the air hose is related to the device when the device is working.

Totally different angle views for 1/4-inches air angle die grinder with rubber sleeve

1/4-inches air angle die grinder with rubber sleeve full set of equipment

1 pcs collet dimension 1/4″ (6.35mm) already put in in angle air die grinder. within the field embrace 1 pcs 1/4″ NPT American commonplace fast connector and a couple of pcs wrench. and 1 pcs added 1/8″(3.18mm) collet.

1/4-inches air angle die grinder with rubber sleeve facet view

Industrial grade 1/4 inch collet, excessive concentricity, small swing, low vibration, excessive put on resistance, balanced operation.

1/4-inches air angle die grinder with rubber sleeve rear view

The 90-degree head permits flexibility in lots of purposes, for reaching tight or angled grinding.

1/4-inches air angle die grinder with rubber sleeve rear view

Stepless pace management knob swap, in line with totally different functions, select totally different pace. The platen kind begins and cease swap is safer and extra dependable.

Extra views for 1/4-inches air angle die grinder with rubber sleeve

1/4-inches air angle die grinder with rubber sleeve air inlet view

The air inlet has a filter to forestall international matter from getting into, and the air inlet can also be a pneumatic oil filler port.

1/4-inches air angle die grinder with rubber sleeve how you can regulate the pace

Underneath regular circumstances, the manufacturing facility air die grinder has adjusted the pace within the regular working utility mode. If in case you have particular necessities for pace, you may regulate the pace once more with a screwdriver.

Collet or grinding head putting in for 1/4-inches air angle die grinder with rubber sleeve

present how you can set up collet or grinding head for 1/4-Inches Angle air die grinder, the wrench is included within the gross sales bundle and the grinding head is just not included.

Instruction guide for 1/4-inches air angle die grinder with rubber sleeve

Please test off all tightening components of the instruments to be in good situation earlier than operation.Working strain to be 6.3 kg/cm3 (90PSI) at operation.Please seek advice from Determine 1 for the device set up. To put in a filter and a lubricator/oiler at an air outletRelease the air provide when changing Grinding head.Put on safety glasses, eye protector, mud masks and gloves at operation.Have a brief break in each 30minutes to keep away from any potential harm as a result of tiredness.Would not have free rotating at excessive pace to keep away from potential harm to the human physique and potential device injury.Don’t contact the rotating a part of the device along with your hand or your physique at operation.

Routine upkeep for 1/4-inches air angle die grinder with rubber sleeve

Cease your Job when discovering any irregular sound or vibration at operation after which test and restore the device.Since you are utilizing clear compressed air at operation. Use an air filter on the air set up to scrub the mud out of the compressed air.Drop some Oil to the inlet of the device after which run the device slowly for a minute and at last begin your work…Auto Lubricator/oiler is beneficial.Any dust mud contained in the motor might end in sluggish rotation even block working, right now, attempt to drop some oil from the inlet, see whether or not resolve the issue or return to the vendor for upkeep.Do launch the water out of the air compressor and air hose after an operation.Preserve instruments with care. Maintain instruments clear for higher and secure efficiency, observe directions for lubricating. Examine instruments cords and air hoses periodically, if broken, have them repaired by a licensed technician.

Compact and light-weight design for simple maneuverability lock-off throttle to forestall unintended startup 90-degree angle head permits flexibility in tight quarters.
Angle die grinder is provided with 0.32 HP motor and may work with a most pace of 20,000 RPM. pneumatic angle die grinder encompasses a built-in pace regulator for higher management.
The 90-degree head permits flexibility in lots of purposes, for reaching tight or angled grinding.
Light-weight aluminum physique, Rear exhaust, Sturdy ball-bearing motor.
Appropriate for precision machining, smoothing, chamfering, deburring, grinding, sprucing, engraving.