Large Area Heated Driveway System for Concrete/Asphalt/Pavers – 240V – 37 Watts per Square Foot –Moisture & Temperature Automatic Activator (220 Square Feet)

Product Description

Add to Cart

Add to Cart

Worth

$219.00$219.00
— no information
$4,059.00$4,059.00

APPLICATION
Snow melting for areas smaller than 50 sq. toes Snow melting for areas between 10 and 185 sq. toes Snow melting for areas between 410 to 1040 sq. toes

ACTIVATOR
12-Hour TImer Computerized – Distant Moisture sensor & twin circuit relay Computerized – Distant moisture sensor and temperature sensor

CIRCUITS
SINGLE 240V 20 AMP SINGLE 240V 30 or 40 AMP 2-4 240v 40 or 50 AMP

Snow Melting with Ease

Activator Included

The M326 line of activators comes with all normal, massive, jumbo and high-wattage SnowMeltz kits. By no means fear about forgetting to energy in your snow melting system earlier than a snow storm.

Energy Switching

The M326 collection even have the facility switching gadget and handles as much as a real 30 amps of load. Eliminating the necessity for a panel for techniques below 190 sq. toes.

For techniques between 200-380 sq. toes, we use a M326ARS-2Z, which has twin 30-amp energy switching properties.

Computerized is Superior

Make sure you get the response you want for you heated driveway or heated sidewalk system with an automated moisture and temperature sensor. The activator will energy on the snow melting system when snow is detected and the temperature is beneath 37 levels after which run for 90 minutes after one or each of these circumstances will not be met.

M326 Sequence Activators Moisture Detection Temperature Detection 30 Amp Energy Swap (M326A) Twin 30 Amp Energy Switches (M326ARS-2Z) Guide Swap Afterrun Settings Climate-proof Case Adjustable Temp & Moisture settings

SnowMeltz Jumper package Placement

SnowMeltz Jumper Package

The SnowMeltz Jumper package comes normal with each SnowMeltz Snow Melting system. Every package incorporates sufficient supplies to make 4 jumpers.

We have concrete dealt with!

SnowMeltz Jumper Package

Putting in a SnowMeltz snow melting package in new driveway or sidewalk concrete and need to take care of management joints, we have got an answer! First step is to format your SnowMeltz mat so to attenuate the variety of instances it crosses a joint. When it does cross a joint, by utilizing the offered jumper kits to encase and shield the SnowMeltz heating aspect, cracks that happen at that management joint vastly reduces the opportunity of harm to the heating aspect, including years of snow melting to the system.

To be used in new concrete pours, not wanted in sand beds or asphalt. For management joints solely, not to be used with growth joints.

Simply Warmth your Concrete, Asphalt, Paver Driveway or Sidewalk with SnowMeltz Snow Melting Mats

Pavers

Embedding SnowMeltz in sand beneath pavers retains aesthetic surfaces free from Ice and Snow with a heated sidewalk.

Concrete

Hold essential entry concrete driveways, like walkways and ramps clear with a snow melting mat system.

Asphalt

Embed SnowMeltz in asphalt to create snow & ice free heated driveways and paths.

Comply with all directions & native codes

Full Testing

Carry out all required exams outlined within the set up guide at a number of phases all through set up to make sure that heating aspect has not been broken.

Failure to carry out all of the required exams at a number of phases could cause system harm to be missed which may result in system errors, floor faults, non-functional techniques, and unrepairable harm.

Utterly Embed

The SnowMeltz heating cable MUST be fully embedded in concrete, asphalt or within the sand mattress beneath pavers.

Each connection/junction factors should even be totally embedded, the connection level on the finish of the heating aspect and the connection level between the heating cable and the black unheated (chilly lead) cable.

Don’t embed in gravel or stones.

Do Not Energy On

Don’t energy on the SnowMeltz System till it has been fully embedded.

Don’t energy on a SnowMeltz System to “take a look at” or to dry out concrete.

DO NOT CUT HEATING ELEMENT

You’ll want to order a SnowMeltz the matches the realm, often order one that’s about 10% smaller than space. The SnowMeltz heating aspect CANNOT be reduce or shortened to a match an area.

Smaller measurement techniques can be found to suit smaller areas.

Keep away from performing any slicing/drilling duties on a completed/partially completed floor that would trigger harm to heating aspect.

SnowMeltz Kits

Normal Measurement SnowMeltz Kits

Normal measurement SnowMeltz kits use a single 30 or 40 amp 240 volt circuit. Sizes from 10 to 185 sq. toes. These kits are available in single or a number of mat configurations and are share a single activation gadget. The activation gadget comes with moisture and temperature sensors to function at most effectivity.

Massive Measurement SnowMeltz Kits

Utilizing two 30 or 40 amp 240 volt circuits and a number of mats, the Massive kits are available in sizes from 200 to 370 sq. toes. The activation gadget comes with a distant moisture sensor for optimum placement and is used along side a temperature sensor to function at most effectivity.

Jumbo Measurement SnowMeltz Kits

Utilizing two to 4 40/50 amp 240 volt circuits a number of mats, the jumbo kits are available in sizes from 410, 615, 820 or 1040 sq. toes. The package features a contactor panel appropriate for the scale of system. The activation gadget comes with a distant moisture sensor for optimum placement and is used along side a temperature sensor to function at most effectivity.

Fundamental SnowMeltz Kits

Fundamental SnowMeltz kits use a single 20 or 30 amp 240 volt circuit. These kits are designed for areas smaller than 50 sq. toes. Simply add a small snow melting mat to sidewalks, landings or paths. All Fundamental snow melting kits include a 12-hour timer for activation.

Not Simply SnowMeltz Specialists, however Electrical Radiant Heating Specialists

SnowMeltz is simply ONE of Heatizon’s big selection of fantastic electrical radiant heating merchandise. We apply our huge information into each product we make. Not solely do we offer snow melting, however we will warmth your flooring, gutters, pipes and even your roof.

A number of snow melting for 220 sq. toes utilizing 2x 30 amp circuits (All mats are 2′ large) Excessive-Effectivity Snow Melting: Our heated driveway package offers 37 watts per sq. foot of heating energy at 240 volts with activator. Successfully melting snow and ice to maintain your driveway clear and secure.
Complete Protection: This driveway heater for snow, consists of 4 mats, protecting a complete of 220 sq. toes, excellent for residential driveways and lightweight industrial functions.
Good Activation: Contains an activator with a temperature and distant moisture sensor that mechanically switches two circuits, each dealing with as much as 30 amps every, making certain environment friendly and well timed operation for driveway heating.
Versatile Set up: The simple roll-out mats could be configured to suit numerous shapes and could be embedded in concrete, asphalt, or in a sand mattress beneath pavers, providing versatile set up choices.
Licensed Security: ETL Listed to be used within the US and Canada, making certain the best security requirements for heated snow mat. The system is appropriate with guide and automated activators, and optionally available relay panels with GFEP safety for added security.