NEIKO 02626A Punch and Chisel Set | 16 Piece | Cold Chisels, Taper, Pin & Center Punches | Chrome Vanadium Steel | Roll Up Pouch | Chisel Tip Gauge | Ground and Polished | Tapered Striking Head

The Neiko 02626A Chilly Chisel and Punch Set is ideal for quite a lot of metallic working similar to chopping, shaving, marking, punching, and scoring in any craftsman or black smith functions. Hand-held punches and chisels are used for eradicating pins and bushings, and chopping or splitting metallic objects. The punch down instruments is produced from a hardened chrome vanadium metal for additional power whereas the polished suggestions present superior sharpness that may that may make sure the longevity and long-lasting service lifetime of this instrument set at dwelling or job. The set contains: three chilly chisels, 5 taper punches, two middle knockout punches, 5 roll pin punches and one chisel punch gauge neatly rolled up in a heavy obligation canvas pouch for easy and handy storage and transportation. This mechanic instrument set is the proper hand instrument set for automotive or building functions. Chisels can be utilized as pry bars as soon as wedges in between two surfaces. Usually utilized by driving with a mallet or hammer. Hex formed design for nice grip below hammering. This set additionally doubles as a full hobbyist and DIYers set. Can be utilized for gunsmithing, building staff, craftsmen, and blacksmiths.
Package deal Dimensions ‏ : ‎ 9.17 x 2.91 x 2.87 inches; 2.89 Kilos
Merchandise mannequin quantity ‏ : ‎ 02626A
Date First Out there ‏ : ‎ March 3, 2022
Producer ‏ : ‎ NEIKO
ASIN ‏ : ‎ B09LRMPT5D
Nation of Origin ‏ : ‎ China
DURABLE: Constructed of exactly floor and polished 40CR chrome vanadium metal (CR-V) with a excessive rockwell hardness tapered edge to cut back spalling.
COLD CHISELS: Used to separate, cut up, and lower by way of exhausting supplies in blacksmithing. 1 x Chisel punch gauge included. 3 x Flat Chisels: 3/8” x 5-1/2”, 1/2” x 6”, 5/8” x 6-1/2”.
CENTER PUNCHES: Used for making an indentation, dimple, marking, scoring, or punching in metallic working. 2 x Prick Punches: 1/8” x 5”, 3/16” x 6”.
TAPER PUNCHES: Designed for bolt gap alignment, knockout, ball joint separation and common use. 5 Aligning Punches: 3/32” x 5-1/4”, 1/8” x 5-3/4”, 5/32” x 6”, 3/16” x 6-1/4”, 1/4” x 6-3/4”.
PIN PUNCHES: Used for putting in, driving, and eradicating rivets, bolts, and pins. 5 x Drive punches: 3/32” x 4-1/4”, 1/8” X 4-3/4”, 5/32” X 5”, 3/16” X 5-1/4”, 1/4” X 5-3/4”.